Head Kit and End Kit

Head Kit

  • Accommodates the highest flow rate in the market.
  • Offers a wide range of required outlet pressure, virtually independent of inlet pressure.
  • Quick and simple installation.
  • Easy to operate.
  • Half turn, built in, high pressure flush.
  • Reliable, trouble free operation.
  • Operates either from line head or mid line.

Pressure Regulator

  • If water is supplied from main pipeline, incoming pressure to header kit should be 1.5 bar (22psi), max. 2 bar (30psi).
  • If water is supplied from a header tank, the header tank should be at least 3m (10ft.) above floor level.
  • Outlet pressure range 0-1 meter water (0-40” water/0-1.5 psi).
  • To switch regulator to high pressure flushing: turn flushing valve to “FLUSH” position.

End Kit

  • One integral unit.
  • Quick and simple installation.
  • Quick and easy connection of flushing flex hose.
  • Flushing between flocks - the flexible tube should be in a straight line.
  • Flushing during the growing period - the flexible tube should be installed one and a half meters high.