|
|
|
Feeding
System
»»
Semi Automatic Feeder |
|
Description
: Description : The Shutter is
traditionally the weak point in Conventional
fans. But in this Euroemme fan shutter system
which utilizes centrifugal energy generated by
propeller to open the shutter has the following
advantages : 1. Counter Weights are not
required. 2. Shutters are always fully opened
when fan is operating and are not affected by
wind or dust accumulations. 3. Shutters will not
stick or hange if they are not periodically
cleaned. 4. Shutters are tightly closed whenfan
is not operating. 5. Because shutters are fully
opened when the fan is operating shutter
pressure drop is minimized. 6. Shutter waving
never occurs. 7. Shutters are in galvanized
steel, which is much stronger than ordinary
aluminium shutter fans. The Propeller has been
designed to maximize air flow while minimizing
energy usage. The round unique blade profile
helps keep the propeller clean. It has the
lowest propeller venturi clearance which results
in higher efficiency and lower air turbulence.
An energy efficent motor incorporates the
highest standard for insulation and protection.
It will even operate even on low voltage.
Dimension :
EM-50, 50” belt
driver
|
Static
Pressure in water |
Speed RPM |
Airflow
CFM |
Efficiency CFM /Watt |
|
0.00 |
378 |
20500 |
21.3 |
|
0.05 |
377 |
19100 |
19.1 |
|
0.10 |
376 |
17700 |
17.2 |
|
0.15 |
376 |
16000 |
15.2 |
|
0.20 |
376 |
13400 |
12.6 |
|
0.25 |
376 |
11100 |
10.6 |
|
0.30 |
375 |
7300 |
6.8 |
Capacity :
|
Advantages :
|
Installation :
|
|
 |
|
|
Send Enquiry |
|
|
|
|
|
